PORTABLE
Power that keeps the job moving.
20–30% less fuel on real jobsites, backed by modular uptime and factory-direct service.
What Mattur portable power is
Mattur builds, sells, and rents portable power systems built for real jobsites. We reduce fuel burn, simplify setup, and maximize uptime with a modular design that’s easy to maintain and backed by factory-direct service.
Why crews switch to Mattur
20-30% less fuel in typical jobsite conditions
Single- and three-phase power at the same time
Modular power that grows and moves with the job
Factory-direct
service to restore power fast
3-year / 3,000-hour warranty
20-30% less fuel in typical jobsite conditions
Single- and three-phase power at the same time
Modular power that grows and moves with the job
Factory-direct
service to restore power fast
3-year / 3,000-hour warranty
Fuel Burn should follow work.
Legacy generators waste fuel at partial load. Mattur doesn’t.
Fuel burn should follow work.
Legacy
Mattur
Full surge power. No bigger unit.
Up to 2× Peak Power with Intelligent Transient Boost. No oversizing.
Legacy: Voltage dips on hard starts vs. Mattur: Instant surge delivery with stable voltage
One System.
Every Load.
Mattur delivers single- and three-phase simultaneously from one integrated power architecture. No extra generators. No workarounds.
- Single- and three-phase at the same time
- Fewer cables and support equipment
- Stable output as demand changes
Replace multiple generators with one integrated system.
See how it works on your site
Built to grow with
the job
Power needs change job to job and sometimes mid-job. With Mattur, you start with the right setup and add power by adding modules, not by replacing equipment.
- Add 14 kW modules as demand grows
- Built-in redundancy as you scale
- Same platform, same support
One architecture. Any Scale.
Mattur is built from standardized 14 kW power modules deploy standalone, aggregate into trailers and scale across multiple Power Blocks – adapting as the job grows.
14 kW
Power Module
Edge 28 Trailer
Up to 2, 14 kW Power Modules
Edge 56 Trailer
Up to 4, 14 kW Power Modules
Skid-mounted Power Block 140kW
Scales without limit
Scale
Add capacity in 14 kW increments from a single module to a site wide distributed system without replacing equipment.
Flexibilty
Deploy standalone, inside Edge trailers, or across multiple Power Blocks - and reconfigure as the job evolves.
Uptime
Service or swap individual modules without shutting down the entire system.
Cost Efficiency
Standardize your fleet around one modular building block instead of multiple dedicated generator sizes.
You don’t just choose a generator.
You configure a power system that can be rearranged as the job changes.
The 14 kW power module
Every Mattur system is built from the same 14 kW power module. These modules deliver stable power, fast surge response, and efficient operation at real jobsite loads.
Modules are interchangeable. They can be installed in trailers, Power Blocks, or moved between them as needs change.
Trailer-based power
where mobility matters
Mattur offers two trailer configurations, built from the same 14 kW modules:
- Edge 28 — up to 2 modules
- Edge 56 — up to 4 modules
Trailers are ideal for mobile power, mixed loads, and jobsites that need fast setup and relocation.
Skid-mounted Power Blocks
For sites that need centralized or higher-density power, Mattur offers
skid-mounted Power Blocks built from the same 14 kW modules.
Each Power Block supports up to 10 modules.
Power Blocks are ideal for fixed infrastructure, larger centralized loads, and jobsites with multiple power zones.
If you need more power, you add another Power Block or trailer—not a different system.
- Each Power Block supports up to 10 modules.
-
If you need more power, you add another Power Block
or trailer—not a different system. -
Power Blocks are ideal for fixed infrastructure,
larger centralized loads, and jobsites with multiple power zones.
Reallocate power as the job changes
Because every Mattur system uses the same 14 kW modules, power can move with the work.
Modules can be shifted between trailers and Power Blocks, reallocated across the jobsite, or added and removed as demand changes.
Your power system adapts as the job evolves.
Configure a system for your jobsite
American built. Accountable.
When power is mission-critical, excuses don’t work.
We design it, manufacture it, and support it – directly.
If a unit goes down, we don’t point fingers.
We show up. Service on site or swap a module – whatever restores power fastest.
Factory-direct service
24-hour response target
3 years / 3,000-hour warranty
Designed, built, and supported in the United States
Why Mattur is fundamentally different
Most portable generators are built around fixed-RPM engines and worst-case sizing.
Mattur is built around how jobsites actually operate.
Mattur vs. Legacy Generators
| Benefit | Mattur | Legacy generators | How Mattur outperforms |
|---|---|---|---|
| Lower fuel spend in real jobsite use | Inefficient at partial load | Burns less fuel from partial to full load | |
| Handles hard starts without oversizing | Oversizing required | 2× peak for starts | |
| One unit covers more jobs | Split-phase limits | 1 + 3-phase simultaneously | |
| Right-size power as the job evolves | No | Add/remove 14kW modules | |
| Stays online during service | Full shutdown risk | Keep running, swap module | |
| Quieter + less wear | Fixed RPM | Variable RPM + hybrid design = less stress | |
| Standardized fleet, less overhead | Many SKUs | Common module platform, single SKU |
What we mean by
10× better
10× better doesn’t mean one spec is ten times higher. It means the system performs better across the dimensions that actually matter on a jobsite.
Faster electrical response. Higher usable surge. Mixed-load capability. Better fuel efficiency at real loads. Direct service and built-in uptime.
Faster
electrical
response
Higher usable
surge
Mixed-load
capability
Better fuel
efficiency at
real loads
Direct service
and built-in
uptime
Faster
electrical
response
Higher usable
surge
Mixed-load
capability
Better fuel
efficiency at
real loads
Direct service
and built-in
uptime
Those advantages compound. That’s what crews experience as “it just works.”
What customers say
We didn’t need a bigger generator. We needed smarter power. Mattur’s modular setup let us scale to what the job actually required instead of oversizing just to survive startup loads. We’ve seen fewer trips and better fuel efficiency since switching.
Daniel T., IronCore Construction
Hard starts used to knock us offline. Not anymore. The way the system handles load swings and big tool startups has been solid. It’s the first portable power platform we’ve used that actually feels built for real jobsite conditions.
Daniel T., IronCore Construction
The flexibility is what sold us. Being able to run power from the trailer or pull a module closer to the work saved us time on distribution and cable runs. Setup is cleaner and easier for our crews.
Sarah L., Ridgeway Infrastructure
It runs steady where other systems struggle. We operate a mix of equipment, and most generators don’t love partial load. Mattur’s system stays efficient even when demand shifts throughout the day. That’s made a noticeable difference in fuel and wear.
Chris M., Summit Industrial Services
It’s built like it belongs on a jobsite. Mobility, control access, runtime — it’s clear this wasn’t designed in a vacuum. The redundancy and modularity give us confidence that we won’t lose time when conditions change.
Jason K., Apex Field Solutions
Specifications and configurations
- 14 kW power modules
- Edge 28 and Edge 56 trailers
- Skid-mounted Power Blocks (up to 10 modules)
- Simultaneous single- and three-phase output
- Environmental ratings and compliance
Purchase and
financing options
Mattur offers flexible options for purchasing portable power, including financing designed for construction and industrial use.
Get pricing & availability
Tell us what you need to power and when you need it.
You’ll see pricing options for rental or purchase next.
Prefer to talk? Call 866-MATTUR-1